The Hydrogen Generator Range (PH) form PEAK Scientific Instruments offer flow rates from 100, 200, 300 and 600cc /
min with a purity of 99.9995% and 0 - 100 psi delivery pressure.
The Hydrogen Generator models perform Automatic System Checks and Leak Detection at start-up, shutting down the
unit if a leak is detected, thus preventing the likelihood of a hazardous situation arising in your laboratory. For
convenience, de-ionised water is loaded automatically into the generator through a water pump contained within the unit.
| Purity (%) |
99.9995 |
| Delivery Pressure (psi/bar) |
0-100 / 0-6.9 |
| Gas Flow Indicator |
Yes |
| Dual Pressure Safety |
Yes |
| System Check |
Yes |
| Leak Detection |
Yes |
| Water Purity Req’d (Conductivity/Resistivity) |
<1.0 uS/cm/ >1.0M Ohm-cm |
| Outlet Port |
1/8º OD tube |
| Electrical Requirements |
230v / 50Hz vA300 |
| Dimensions (cm) |
31 x 49 x 42 |
| Weight (kg) |
48.5 |
Hydrogen Generator Model PH300
From Peak Scientific Instruments
Return
To Top Of Page • Return
to Analytical Instruments & Laboratory Gas Generators List • Return to Main List
|
Tel: 03
5367 8277